NSN 3020-00-423-0800 · NIIN 004230800 · FSC 3020
NO DASHES 3020004230800
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624,FS8620,FS8720,FS4620,FS4817 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.296 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.093 |
| ABSA | SPLINE QUANTITY | 6 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.3125 |
| STYL | STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.560 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.954 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 3.750 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 0.347 |
| MATT | MATERIAL | OVERALL STEEL |
| ANTP | BORE STYLE | |
| BDZQ | BACKLASH DESIGNATION | GRADE A |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 4.125 |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 0.135 |
| FEAT | SPECIAL FEATURES | SPLINE MINOR DIA. 1.999 IN. NOM |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AJLA | TEETH QUANTITY | 38 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 63.0 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 2.610 |
| CWTR | HUB STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIINs 003180635 · 003540861 · 004571944. An older drawing citing one of those numbers resolves here.