NSN 5990-00-924-3939 · NIIN 009243939 · FSC 5990
NO DASHES 5990009243939
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
44 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.4130 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.1250 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.154 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.1900 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0620 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 1590.00 AND MAXIMUM 2050.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | MINIMUM 79.00 AND MAXIMUM 85.00 |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 470.00 AND MAXIMUM 570.00 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | MINIMUM 23.00 AND MAXIMUM 33.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 60.00 |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 49.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 530.0 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1872 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5620 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| CQTM | TERMINAL LOCATION | REAR |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.8510 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 90.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MAXIMUM 0.070 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 20.0 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.1900 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILS20708 AND SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILS20708 TO 81 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9370 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
Supersedes
This item replaces cancelled NIIN 007853214. An older drawing citing one of those numbers resolves here.