NSN 5990-00-975-0559 · NIIN 009750559 · FSC 5990
NO DASHES 5990009750559
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0630 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.8370 AND INCHES MAXIMUM 0.8400 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 115.00 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.7860 |
| AAQL | BODY STYLE | |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.5 TO 7.5 |
| AJSL | BODY SIZE | 10 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0880 AND INCHES MAXIMUM 0.0900 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 50.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 470.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MAXIMUM 0.0500 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 800.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.00 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 21.0 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2410 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.501 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6780 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 5 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 2900.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 560.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 100.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 9.000 |
| CQTM | TERMINAL LOCATION | REAR |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 9.00 |
Supersedes
This item replaces cancelled NIIN 009453520. An older drawing citing one of those numbers resolves here.