NSN 3020-01-006-0663 · NIIN 010060663 · FSC 3020
NO DASHES 3020010060663
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 2.9660 AND INCHES MAXIMUM 2.9680 |
| AJLA | TEETH QUANTITY | 23 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | OVERALL BRINELL STANDARD MINIMUM 269.0 AND BRINELL STANDARD MAXIMUM 302.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.159 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 37.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 0.290 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.750 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.875 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.250 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.563 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 1.740 |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR |