NSN 3010-00-165-3876 · NIIN 001653876 · FSC 3010
NO DASHES 3010001653876
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 5.250 |
| AAJU | OVERALL LENGTH | INCHES 2.812 |
| AAJV | OVERALL WIDTH | INCHES 2.750 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.2500 |
| ACDC | CURRENT TYPE | INPUT AC |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | OPEN |
| AXCP | WINDING TYPE | INDUCTION-SHADED POLE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END OFFSET ABOVE PARALLEL TO SHAFT AXIS |
| BFMF | COOLING METHOD | FAN COOLED |
| BKPH | TORQUE RATING AND TYPE | INCH-POUNDS STALLED 15.0 |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.000 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 2.719 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 1.562 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.562 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL LOW 6.0 OR LINE TO NEUTRAL HIGH 240.0 |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | FIRST END LOW REVOLUTIONS PER MINUTE 40.000 AND HIGH REVOLUTIONS PER MINUTE 80.000 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A1 |
| FAAZ | PHASE | INPUT SINGLE |
| FREQ | FREQUENCY IN HERTZ | 50.0 OR 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 2 |