NSN 1005-00-731-0080 · NIIN 007310080 · FSC 1005
NO DASHES 1005007310080
In Stock
PIN,FIRING
Guns, through 30mm
Application: MACHINE GUN,CAL. .50 (M2); NSN 1005-00-322-9715
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | STEEL COMP 8642 OR STEEL COMP 8740 |
| AMZS | FIRING PIN TYPE | MULTIPLE SHOULDER |
| SFTT | SURFACE TREATMENT | PHOSPHATE |
| ZZZV | FSC APPLICATION DATA | MACHINE GUN,CAL. 0.50 M2 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.808 AND INCHES MAXIMUM 3.818 |
| AETC | METALLIC HARDNESS RATING | MINIMUM ROCKWELL A 73.5 AND MAXIMUM ROCKWELL A 77.0 |
| AASG | CASEHARDENING INDICATOR | NOT CASE-HARDENED |
| FEAT | SPECIAL FEATURES | 32 MICROINCH AA FINISH ON STRIKING END SURFACE |
| AMZR | STRIKING END RADIUS | INCHES MINIMUM 0.040 AND INCHES MAXIMUM 0.045 |
| AMZT | STRIKING END TYPE | SPHERICAL |
| AGAV | END ITEM IDENTIFICATION | MACHINE GUN,CAL. .50 (M2); NSN 1005-00-322-9715 |
| AMZG | STRIKING END DIAMETER | INCHES MINIMUM 0.077 AND INCHES MAXIMUM 0.078 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD SINGLE MATERIAL RESPONSE FED STD 66,CO- AISI 8642 OR 8740 |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1005PL0903989 | 9009H |
| 1005PL1646961 | 9009H |
| 1005007310080 | A00AM |
| 3662005190 | B0897 |
| 75F4041 | F5322 |
| 10074256 | A486G |
| 366-200-5190 | A00AM |
| A10341 | U4574 |
| 201020009 | T6472 |
| A10477 | U4574 |
| 711662810010 | 0000V |
| 7310080 | 19200 |