NSN 2520-00-752-1730 · NIIN 007521730 · FSC 2520
NO DASHES 2520007521730
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BNYS | FLANGE OVERALL THICKNESS | INCHES NOMINAL 1.813 |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BBCF | SECOND END SPLINE QUANTITY | 16 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.504 AND INCHES MAXIMUM 0.506 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 8 |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | INCHES NOMINAL 0.500 |
| MATT | MATERIAL | STEEL COMP 1046 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 1.375 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.489 AND INCHES MAXIMUM 1.501 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.622 AND INCHES MAXIMUM 1.627 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 41.031 |
| AHTC | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 6.427 AND INCHES MAXIMUM 6.447 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-633, FS1046-CANCELED |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7521730 | 19207 |
| 1401D4 | 22852 |
| 3202Q2513 | 63734 |
| 3203-Q-2513 | 78500 |
| 2520007521730 | A00AM |