NSN 2520-00-832-8075 · NIIN 008328075 · FSC 2520
NO DASHES 2520008328075
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| AMQF | SECOND END TYPE | SPLINED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 9.625 |
| AETC | METALLIC HARDNESS RATING | MINIMUM BRINELL STANDARD 375.0 AND MAXIMUM BRINELL STANDARD 430.0 |
| AMDM | FIRST END SPLINE LENGTH | INCHES NOMINAL 2.438 |
| MATT | MATERIAL | STEEL COMP 8645H |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE SAE 8645H |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.616 AND INCHES MAXIMUM 1.621 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 3.250 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.319 AND INCHES MAXIMUM 1.329 |
| BBCF | SECOND END SPLINE QUANTITY | 10 |
| AMQA | FIRST END TYPE | SPLINED |
| BBCD | FIRST END SPLINE QUANTITY | 10 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 2.246 AND INCHES MAXIMUM 2.256 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 2.513 AND INCHES MAXIMUM 2.514 |
| BNYX | FIRST END SPLINE TYPE | STRAIGHT |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3280-Z-4472 | 78500 |
| 2520008328075 | SCY13 |
| 10948101 | 19207 |
Supersedes
This item replaces cancelled NIIN 008328239. An older drawing citing one of those numbers resolves here.