NSN 2520-01-421-4588 · NIIN 014214588 · FSC 2520
NO DASHES 2520014214588
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Application: 2320-01-412-0143
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.450 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 26.050 |
| AETC | METALLIC HARDNESS RATING | NOMINAL ROCKWELL C 50.0 |
| AGAV | END ITEM IDENTIFICATION | 2320-01-412-0143 |
| AHTC | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 3.539 AND INCHES MAXIMUM 3.543 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 2.440 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 1.3333 |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 6 |
| BBCF | SECOND END SPLINE QUANTITY | 32 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| BNYS | FLANGE OVERALL THICKNESS | INCHES NOMINAL 0.335 |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | INCHES NOMINAL 0.200 |
| FEAT | SPECIAL FEATURES | USED ON LEFT FRONT SIDE |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RCSK17028-3 | 34623 |
| 299-0050 | 62826 |
| XA13962 | 62826 |
| 2520PL0644299 | 9009H |
| 2520014214588 | A00AM |