NSN 2920-01-292-2993 · NIIN 012922993 · FSC 2920
NO DASHES 2920012922993
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Application: 2350-01-219-7577
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.730 AND INCHES MAXIMUM 0.754 |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.780 AND INCHES MAXIMUM 0.781 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.166 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES MINIMUM 1.246 AND INCHES MAXIMUM 1.270 |
| ADER | MOUNTING STYLE | |
| AFYS | KEYWAY LENGTH | INCHES MINIMUM 1.000 AND INCHES MAXIMUM 1.020 |
| AGAV | END ITEM IDENTIFICATION | 2350-01-219-7577 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES MINIMUM 1.353 AND INCHES MAXIMUM 1.389 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.750 |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 5.200 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 5.200 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 10.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.281 AND INCHES MAXIMUM 7.332 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 8.530 AND INCHES MAXIMUM 8.626 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.440 AND INCHES MAXIMUM 0.462 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.375 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12358709-1 | 19207 |
| N1206 | 76761 |
| 2920012922993 | A00AM |