NSN 2920-01-420-9968 · NIIN 014209968 · FSC 2920
NO DASHES 2920014209968
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Application: 2320-01-380-8604; WEAPON SYSTEM E/I TRUCK, VEHICLE SYSTEM, 1 1/4-TON (HMMWV)
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABRR | KEYWAY WIDTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.251 |
| ADER | MOUNTING STYLE | |
| ADZC | ENVIRONMENTAL PROTECTION | FUNGUS RESISTANT |
| AFYS | KEYWAY LENGTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.000 |
| AGAV | END ITEM IDENTIFICATION | 2320-01-380-8604; WEAPON SYSTEM E/I TRUCK, VEHICLE SYSTEM, 1 1/4-TON (HMMWV) |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.750 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 200.0 |
| BCGN | GROUNDING METHOD | EXTERNAL |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 5.200 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 5.200 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 170.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 170.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.281 AND INCHES MAXIMUM 7.332 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 8.471 AND INCHES MAXIMUM 8.548 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.453 AND INCHES MAXIMUM 0.469 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 3A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.375 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12447109 | 19207 |
| 12338796-1 | 19207 |
| 5589164 | 34623 |
| A0013030AA | 35510 |
| 12447109 | 34623 |
| N1225-1 | 76761 |
| N1211-2 | 76761 |
| 2920PL0649046 | 9009H |
| SDE4209968 | 9331B |
| 1626000 | G1005 |
| 2920014209968 | A00AM |
| 2920012646542 | A00AM |
| 456720024606 | 0000V |
Supersedes
This item replaces cancelled NIINs 011885130 · 012646542. An older drawing citing one of those numbers resolves here.