NSN 3020-00-752-1006 · NIIN 007521006 · FSC 3020
NO DASHES 3020007521006
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.734 |
| STYL | STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 15 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | FIRST END INCHES 2.625 |
| CWTR | HUB STYLE DESIGNATOR | |
| AJLA | TEETH QUANTITY | 45 |
| ANTP | BORE STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 7.5000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 7.803 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 17.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.604 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.428 |
| CWTB | COUNTERBORE NOMINAL DEPTH | FIRST END INCHES 0.250 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 3.750 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 0.384 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 3.122 |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 0.218 |
| MATT | MATERIAL | OVERALL STEEL COMP 8620H |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 2.1428 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 59.0 AND ROCKWELL C MAXIMUM 62.0 |