NSN 3020-00-753-9882 · NIIN 007539882 · FSC 3020
NO DASHES 3020007539882
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJLA | TEETH QUANTITY | 69 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 11.5000 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 3.000 |
| ANTP | BORE STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 1.523 |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 1.4000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL SUPERFICIAL 15-N MINIMUM 90.0 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH FACE PLAIN 3 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 12.207 |
| STYL | STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.960 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 2.356 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.500 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.500 |
| ABSA | SPLINE QUANTITY | 14 |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | AXIALLY THROUGH HUB FIRST END INCHES 0.281 |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | AXIALLY THROUGH HUB FIRST END INCHES 2.312 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-13048 |
| CWNH | TOOTH FORM | STANDARD |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 0.073 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 1.879 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7539882 | 19207 |
| 6764642 | 24617 |
| 6764642 | 73342 |
| 3020007539882 | SCY13 |