SHAFT,SHOULDERED

Name: SHAFT,SHOULDERED
Brand: Atlas Air Supply
SKU: 3040014851815
Availability: LimitedAvailability

Miscellaneous Power Transmission Equipment

Application: LOS ANGELES CLASS SSN

Technical characteristics

20 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AAGZ	FIRST END STYLE
AAHN	END SIMILARITY	NOT IDENTICAL
AAHP	SECOND END STYLE
ABHP	OVERALL LENGTH	INCHES NOMINAL 29.125
AGAV	END ITEM IDENTIFICATION	LOS ANGELES CLASS SSN
AMDL	FIRST END DIAMETER	INCHES MINIMUM 4.9950 AND INCHES MAXIMUM 4.9980
AMDM	FIRST END SPLINE LENGTH	INCHES NOMINAL 4.5000
AMDN	FIRST END SPLINE MINOR DIAMETER	INCHES MINIMUM 5.0020 AND INCHES MAXIMUM 5.0050
AMDP	FIRST END SPLINE MAJOR DIAMETER	INCHES MINIMUM 5.4900 AND INCHES MAXIMUM 5.5000
AMFZ	SECOND END DIAMETER	INCHES MINIMUM 4.9950 AND INCHES MAXIMUM 4.9980
AMHP	SECOND END INTERNAL THREAD LENGTH	INCHES NOMINAL 0.870
ATPC	STEP QUANTITY	4
BDSQ	FIRST END SPLINE QUANTITY	20
CSPY	LARGEST STEP DIAMETER	INCHES MINIMUM 5.490 AND INCHES MAXIMUM 5.500
CSYM	SURFACE FINISH	MICROINCHES 63.0
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	SHAFT,TORQUE
FEAT	SPECIAL FEATURES	NHA VLS MISSILE TUBE MUZZLE HATCH
MATT	MATERIAL	TITANIUM ALLOY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL SPEC SINGLE MATERIAL RESPONSE -IL-T-9047 ALY TI-6AL-4V, COND A
SUPP	SUPPLEMENTARY FEATURES	FIRST END HAS CENTER JACKING HOLE COUNTERBORED AND THREADED .500-13UNC-2B: SECOND END ALSO HAS CENTER HOLE AND THREE (3) HOLES SPACED 120 DEGREES ON 3.750 DIA. CENTERS; HOLES ARE COUNTERSUNK 1.33 0.67 X 90 AND THREADED .625-11UNC-2B TO .87 MIN FULL THREAD: SHAFT HAS 2 SPLINES; 1ST END SPLINE LENGTH 4.500 IN., THEN 11.250 STRAIGHT SHAFT, THEN SECOND SPLINE (SAME SPLINE DATA) 5.00 IN. LONG, LEAVING 8.375 IN. STRAIGHT SHAFT LENGTH 2ND END

5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.