BEARING,BALL,DUPLEX

Name: BEARING,BALL,DUPLEX
Brand: Atlas Air Supply
SKU: 3110010842537
Availability: LimitedAvailability

Bearings, Antifriction, Unmounted

Technical characteristics

22 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
ABMK	OVERALL WIDTH	MILLIMETERS NOMINAL 32.00
ABXV	BORE DIAMETER	MILLIMETERS NOMINAL 45.00
ADGA	OVERALL OUTSIDE DIAMETER	MILLIMETERS NOMINAL 75.00
AGYE	SURFACE FINISH	GROUND
AGYF	RETAINER FABRICATION METHOD	MACHINED
AGZC	LOAD DIRECTION	ANGULAR
AKVV	INTERNAL CLEARANCE	INCHES MINIMUM AXIAL 0.0120 AND INCHES MAXIMUM AXIAL 0.0190
CTFZ	STANDARD TOLERANCE DESIGNATION	ABEC NO.5
FEAT	SPECIAL FEATURES	STABILIZED FOR OPERATION AT M65 DEG F TO P600 DEG F,C58.0 MIN ROCKWELL HARDNESS RINGS AND BALLS,BEARING WITH POINT OF V TO HAVE SEPARABLE INNER RING
MATT	MATERIAL	BALL STEEL
MATT	MATERIAL	RETAINER STEEL
MATT	MATERIAL	INNER RING STEEL
MATT	MATERIAL	OUTER RING STEEL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	RETAINER ASSN STD SINGLE MATERIAL RESPONSE A-S 6415
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	INNER RING ASSN STD SINGLE MATERIAL RESPONSE A-S 6490
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	BALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6490
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OUTER RING ASSN STD SINGLE MATERIAL RESPONSE A-S 6490
PMLC	PRECIOUS MATERIAL AND LOCATION	SILVER RETAINER
PRMT	PRECIOUS MATERIAL	SILVER
PRPY	PROPRIETARY CHARACTERISTICS	PACS
STYL	STYLE DESIGNATOR
TEST	TEST DATA DOCUMENT	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 78286-SB1139-101

9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.