HOUSING,BEARING UNIT

Name: HOUSING,BEARING UNIT
Brand: Atlas Air Supply
SKU: 3130012320538
Availability: LimitedAvailability

Bearings, Mounted

Technical characteristics

18 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AAWY	COUNTERBORE DIAMETER	INCHES NOMINAL 2.000
AAWZ	COUNTERBORE DEPTH	INCHES NOMINAL 1.875
ABTB	MOUNTING HOLE DIAMETER	INCHES MINIMUM 1.282 AND INCHES MAXIMUM 1.284
ABXV	BORE DIAMETER	INCHES MINIMUM 2.0000 AND INCHES MAXIMUM 2.0010
ACYB	BASE THICKNESS	INCHES NOMINAL 2.000
ADFX	CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH	INCHES NOMINAL 15.000
AFWC	HOUSING HEIGHT	INCHES NOMINAL 8.250
AFWE	HOUSING WIDTH	INCHES NOMINAL 17.750
AGKL	LUBRICATION FITTING TYPE	PIPE PLUG
AGNF	BASE LENGTH	INCHES NOMINAL 2.750
AHZC	ASSEMBLY OVERALL LENGTH	INCHES NOMINAL 4.4900
ANJS	SHAFT END TYPE	OPEN
ANKP	HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE	INCHES NOMINAL 6.500
CWGR	LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE	DEGREES NOMINAL 90.0
CWJW	MOUNTING HOLE TYPE	ROUND, UNTHREADED, COUNTERBORED
FEAT	SPECIAL FEATURES	SECOND BEARING MOUNTING HOLE 1.000 IN. DIA MIN TO 1.001 IN. DIA MAX,CENTERED 3.500 IN. RIGHT OF VERT CL,0.750 IN. BELOW HORIZ CL; THIRD BEARING MOUNTING HOLE 0.750 IN. DIA MIN TO 0.751 IN. DIA MAX CENTERED 5.500 IN. LEFT OF VERT CL,1.250 IN. BELOW HORIZ CL; 0.250 IN. DIA THRU HOLE FROM BASE TO FIRST BORE,TAP 0.125 PTF; TWO 0.250-20UNC-2B TAPPED THRU HOLES IN FACE CENTERED 1.120 IN. RIGHT OF THIRD BEARING MOUNTING HOLE,0.380 ABOVE AND BELOW THIRD BEARING MOUNTING HOLE HORIZ CL
MATT	MATERIAL	OVERALL COPPER ALLOY 958
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-B-24480

3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.