NSN 5305-00-045-8338 · NIIN 000458338 · FSC 5305
NO DASHES 5305000458338
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.575 AND INCHES MAXIMUM 0.625 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.625 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.191 AND INCHES MAXIMUM 0.225 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 55000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 OR STEEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 1ST MATERIAL RESPONSE QQ-S-630 OR FED SPEC 1ST MATERIAL RESPONSE QQ-S-631 OR FED SPEC 1ST MATERIAL RESPONSE QQ-S-634 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC ALL TREATMENT RESPONSES QQ--416,TY 2 CL 3 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 211-0106-00 | 80009 |
| FFS92TYPE3STYLE3C | 81348 |
| 40631 | 82254 |
| A13200E536 | 82254 |
| 5305PL0890216 | 9009H |
| MS24693-S7 | 96906 |
| 5305000458338 | A00AM |
| 10124864 | A486G |
| MS24693S7 | D9182 |
| 5305-045-8338 | A00AM |
Supersedes
This item replaces cancelled NIINs 001512075 · 007349090 · 009289362. An older drawing citing one of those numbers resolves here.