NSN 5305-00-051-6521 · NIIN 000516521 · FSC 5305
NO DASHES 5305000516521
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.312 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.312 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.238 AND INCHES MAXIMUM 0.279 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-630 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-S-631 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-S-634 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC ALL TREATMENT RESPONSES QQ--416 TY 2 CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| C10236-0305-0001 | 60678 |
| 211-0538-00 | 80009 |
| MS24693-S25 | 80205 |
| 5305PL1890207 | 9009H |
| 5305PL0716689 | 9009H |
| MS24693-S25 | 96906 |
| AN507-632R5 | D9182 |
| MS24693-25 | D9182 |
| S1133243-6-5 | D9182 |
| 5305000516521 | A00AM |
| 933.45.16.118 | S4080 |
| 4177085-013 | 05869 |
Supersedes
This item replaces cancelled NIIN 006382356. An older drawing citing one of those numbers resolves here.