NSN 5305-00-088-8332 · NIIN 000888332 · FSC 5305
NO DASHES 5305000888332
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.340 AND INCHES MAXIMUM 0.385 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.625 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD SINGLE MATERIAL RESPONSE 66 OR ASSN STD SINGLE MATERIAL RESPONSE AST-A108 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 OR MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-81562,TY 2,CL 3 |
| AASK | HEAD STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.542 AND INCHES MAXIMUM 0.625 |
| AAJD | THREAD CLASS | 2A |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| CYAU | SCREW MATERIAL | STEEL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 3 AND STYLE 2C |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 108923A | 45152 |
| MS35190-272 | 60144 |
| 108923A | 75Q65 |
| MS35190-272 | 80205 |
| FF-S-92 | 81348 |
| 5305PL0824406 | 9009H |
| MS35237-71 | 96906 |
| MS35190-272 | 96906 |
| MS35194-56 | D9182 |
| 5305000888332 | A00AM |
| SK-14004-2 | 0EAK3 |
Supersedes
This item replaces cancelled NIINs 000110532 · 000120519 · 000631232 · 000594946 · 001555029 · 011981618 · 012360438. An older drawing citing one of those numbers resolves here.