NSN 5305-00-614-0274 · NIIN 006140274 · FSC 5305
NO DASHES 5305006140274
In Stock
SCREW,MACHINE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAJD | THREAD CLASS | 2A |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 55000 |
| CYAU | SCREW MATERIAL | STEEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-633 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.500 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.123 AND INCHES MAXIMUM 0.130 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ASXK | HOLE QUANTITY | 1 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.046 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.417 AND INCHES MAXIMUM 0.500 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.292 AND INCHES MAXIMUM 0.313 |
| AASK | HEAD STYLE | |
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| ABQZ | INTERNAL DRIVE STYLE |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12Z8PC282 | 53711 |
| A1635-19 | 76275 |
| FFS92 | 81348 |
| 5305PL0144839 | 9009H |
| MS35265-63 | 96906 |
| 13207E6701FN48 | 97403 |
| 1049-037 | D9182 |
| MS35265-63 | A0126 |
| 5305006140274 | A00AM |
| 3-12-HOF | U8157 |
| 30012 HOF | U8157 |
| 66505 | 10237 |
Supersedes
This item replaces cancelled NIINs 004287661 · 005826390 · 007961240 · 009211249 · 011565092. An older drawing citing one of those numbers resolves here.