NSN 5305-00-719-5240 · NIIN 007195240 · FSC 5305
NO DASHES 5305007195240
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE AST- B633 TY 2 SC 3 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE J429 GR 8 |
| SFTT | SURFACE TREATMENT | OVERALL ZINC AND CHROMATE |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 150000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 38.0 |
| MATT | MATERIAL | OVERALL STEEL |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.323 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.250 AND INCHES MAXIMUM 1.438 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.406 AND INCHES MAXIMUM 2.500 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 2 AND STYLE 10 AND GRADE 8 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.736 AND INCHES MAXIMUM 0.750 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12296696-1 | 19207 |
| 375N300-001-21 | 25500 |
| 91248A721 | 39428 |
| B1821BH050F250N | 80204 |
| FF-S-85 | 81348 |
| 414 055 C1 | 89346 |
| 5305PL0782780 | 9009H |
| MS90727-117 | 96906 |
| MS90726-117 | 96906 |
| 375N300-001-21 | 99696 |
| SNRG.113.10024 | A42KJ |
| 5305007195240 | SCY13 |
| B1821BH050F250N | 05047 |
Supersedes
This item replaces cancelled NIINs 000223709 · 000214200 · 000571052 · 002066207 · 006255744. An older drawing citing one of those numbers resolves here.