NSN 5305-00-912-5113 · NIIN 009125113 · FSC 5305
NO DASHES 5305009125113
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 5 |
| ASXK | HOLE QUANTITY | 1 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.062 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 23.0 AND ROCKWELL C MAXIMUM 32.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 85000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.226 AND INCHES MAXIMUM 0.243 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.551 AND INCHES MAXIMUM 0.562 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.719 AND INCHES MAXIMUM 0.875 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.845 AND INCHES MAXIMUM 0.875 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 120000 |
| AAJD | THREAD CLASS | 2A |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1C614 | 1X0J7 |
| MS51096-359 | 80205 |
| 1C614 | 89749 |
| MS51096-359 | 96906 |
| MS90726-59 | 96906 |
| MS51096-59 | 96906 |
| AB06BR229 | D9182 |
| XX003-0684 | H2229 |
| 5305009125113 | SCY13 |
Supersedes
This item replaces cancelled NIINs 000214750 · 000182717 · 000106285 · 009853995. An older drawing citing one of those numbers resolves here.