NSN 5305-00-957-7815 · NIIN 009577815 · FSC 5305
NO DASHES 5305009577815
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 40 |
| AAJD | THREAD CLASS | 2A |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ABQZ | INTERNAL DRIVE STYLE | |
| CYAU | SCREW MATERIAL | STEEL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.191 AND INCHES MAXIMUM 0.225 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD SINGLE MATERIAL RESPONSE 66 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.295 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.375 |
| AASK | HEAD STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS24693-S4 | 4EXW5 |
| MS24693-S4 | 80205 |
| 5305PL0142349 | 9009H |
| MS24693-S4 | 96906 |
| AN507-440R6 | D9182 |
| AN507-440-6 | D9182 |
| MS24693-4 | D9182 |
| 210672-61 | D9182 |
| 5305009577815 | A00AM |
| C10236-0106-000 1 | D9182 |
| 10114736 | A486G |
| MS24693-S4 | 07ZN5 |
Supersedes
This item replaces cancelled NIINs 008054330 · 008427720 · 008859727 · 010893452. An older drawing citing one of those numbers resolves here.