NSN 5305-00-957-7821 · NIIN 009577821 · FSC 5305
NO DASHES 5305009577821
In Stock
SCREW,MACHINE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAJD | THREAD CLASS | 2A |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.285 AND INCHES MAXIMUM 0.332 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CYAU | SCREW MATERIAL | STEEL |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.938 AND INCHES MAXIMUM 1.000 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.000 |
| AASK | HEAD STYLE | |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED STD SINGLE MATERIAL RESPONSE 66 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 807763-00 | 32345 |
| FF-S-92 | 81348 |
| 5305PL0142355 | 9009H |
| MS24693-S54 | 96906 |
| 5305009577821 | A00AM |
| 933.45.16.144 | S4080 |
| 9334516144 | S4080 |
| 807763 | 19203 |
Supersedes
This item replaces cancelled NIINs 002718155 · 005794231. An older drawing citing one of those numbers resolves here.