NSN 5305-00-958-5247 · NIIN 009585247 · FSC 5305
NO DASHES 5305009585247
In Stock
SCREW,MACHINE
Screws
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 55000 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.900 AND INCHES MAXIMUM 1.000 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM OR ZINC |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE TREATMENT RESPONSE SAE TO A-S QQ--416, TY2CL3 OR ASSN STD SINGLE TREATMENT RESPONSE AST--B633 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.442 AND INCHES MAXIMUM 0.447 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.000 |
| AAJD | THREAD CLASS | 2A |
| AASK | HEAD STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ABQZ | INTERNAL DRIVE STYLE |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 101139 | 2S125 |
| 02011-7G416 | 60905 |
| ANSI B18.6.3 | 80204 |
| MS35190-291 | 80205 |
| FF-S-92 | 81348 |
| FF-S-92 TY3ST2CSZ1/4 | 80244 |
| 71134-291 | 95097 |
| MS35190-291 | 96906 |
| XX002-0623 | H2229 |
| 5305009585247 | SCY13 |
| 82-2046-0100 | 04664 |
| SK-1002 | 0EAK3 |
Supersedes
This item replaces cancelled NIINs 002978216 · 002978038. An older drawing citing one of those numbers resolves here.