NSN 5305-00-964-0562 · NIIN 009640562 · FSC 5305
NO DASHES 5305009640562
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.190 AND INCHES MAXIMUM 3.250 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2 CL 2 |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.000 AND INCHES MAXIMUM 1.188 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 85000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.226 AND INCHES MAXIMUM 0.243 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.551 AND INCHES MAXIMUM 0.562 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 120000 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.062 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ASXK | HOLE QUANTITY | 1 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 5 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 23.0 AND ROCKWELL C MAXIMUM 32.0 |
| AAJD | THREAD CLASS | 2A |
| AASK | HEAD STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 2 AND STYLE 10 |
| BQDM | HOLE TYPE | DRILLED |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NASM51095 | 80205 |
| MS51095-369 | 80205 |
| FF-S-85 | 81348 |
| MS51095-369 | 96906 |
| 5305009640562 | SCY13 |
| 13-652 | 10988 |
Supersedes
This item replaces cancelled NIINs 000213754 · 000216940 · 007534131. An older drawing citing one of those numbers resolves here.