NSN 5305-00-978-9355 · NIIN 009789355 · FSC 5305
NO DASHES 5305009789355
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL |
| AASK | HEAD STYLE | |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 130000 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.511 AND INCHES MAXIMUM 0.625 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 6 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.156 AND INCHES MAXIMUM 0.159 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.625 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.185 AND INCHES MAXIMUM 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 45.0 |
| AAJD | THREAD CLASS | 3A |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.303 AND INCHES MAXIMUM 0.313 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL TREATMENT RESPONSES QQ--416,TY 2,CL 3 |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 00296 | 54252 |
| FF-S-86 | 81348 |
| 43S44640-1650 | 94135 |
| MS16997-45 | 96906 |
| 13207E2681FN3 | 97403 |
| MS16997-45 | D9893 |
| 3176209-A-043 | D9182 |
| MS16997-45 | D5589 |
| 166252-5 | D9182 |
| 10465435 | A486G |
| 5305009789355 | SCY13 |
| MS16997-45 | 0158B |
Supersedes
This item replaces cancelled NIINs 000648490 · 002864041 · 005239529. An older drawing citing one of those numbers resolves here.