NSN 5305-00-978-9396 · NIIN 009789396 · FSC 5305
NO DASHES 5305009789396
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.460 AND INCHES MAXIMUM 1.500 |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.335 AND INCHES MAXIMUM 1.500 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL TREATMENT RESPONSES QQ--416,TY 2,CL 3 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 6 |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 45.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 130000 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.312 AND INCHES MAXIMUM 0.316 |
| AASK | HEAD STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.550 AND INCHES MAXIMUM 0.562 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.368 AND INCHES MAXIMUM 0.375 |
| MATT | MATERIAL | OVERALL STEEL |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NAS1352-6P | 80205 |
| FF-S-86 REVISION C | 81348 |
| FFS86 | 81348 |
| 5305PL0577327 | 9009H |
| 51512 | 96046 |
| MS16997-101 | 96906 |
| 3X46 | D9182 |
| MS35457-68 | D9182 |
| 3X-1074 | D9182 |
| 5305009789396 | SCY13 |
| 402510016 | S5686 |
| 0701969 | S3002 |
Supersedes
This item replaces cancelled NIINs 006162736 · 010169133. An older drawing citing one of those numbers resolves here.