NSN 5305-00-983-5345 · NIIN 009835345 · FSC 5305
NO DASHES 5305009835345
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 45.0 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.253 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.483 AND INCHES MAXIMUM 0.625 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.625 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.457 AND INCHES MAXIMUM 0.468 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 130000 |
| MATT | MATERIAL | OVERALL STEEL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 6 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.306 AND INCHES MAXIMUM 0.312 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| SCD15200-2B | 30114 |
| MS16997-77 | 32345 |
| 2HG28 | 45152 |
| 5&16&18X5&8SCP | 70318 |
| FF-S-86 REVISION C | 81348 |
| 5305PL0704986 | 9009H |
| MS16997-77 | 96906 |
| 5305009835345 | A00AM |
| 3176207-A-120 | 10001 |
Supersedes
This item replaces cancelled NIINs 008581510 · 009938532. An older drawing citing one of those numbers resolves here.