NSN 5305-00-983-6656 · NIIN 009836656 · FSC 5305
NO DASHES 5305009836656
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 32 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2 CL 3 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| AASK | HEAD STYLE | |
| MATT | MATERIAL | OVERALL STEEL |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.185 AND INCHES MAXIMUM 0.190 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 130000 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 6 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 45.0 |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.085 AND INCHES MAXIMUM 1.333 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.303 AND INCHES MAXIMUM 0.312 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.156 AND INCHES MAXIMUM 0.158 |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.960 AND INCHES MAXIMUM 2.000 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 870918-00 | 32345 |
| P401 | 64560 |
| NAS1351-3-32P | 80205 |
| FFS86 | 81348 |
| FF-S-86 REVISION C | 81348 |
| 5305PL0720588 | 9009H |
| MS16998-35 | 96906 |
| 5305009836656 | SCY13 |
| 5305-983-6656 | SCY13 |
| MS16998-35 | 0158B |
Supersedes
This item replaces cancelled NIIN 001432782. An older drawing citing one of those numbers resolves here.