SCREW,CLOSE TOLERANCE

Name: SCREW,CLOSE TOLERANCE
Brand: Atlas Air Supply
SKU: 5305015024868
Availability: LimitedAvailability

Screws

Application: F18 E/F

Technical characteristics

23 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	INCHES NOMINAL 0.345
AASB	FASTENER LENGTH	INCHES MINIMUM 1.205 AND INCHES MAXIMUM 1.235
AASK	HEAD STYLE
AASL	HEAD DIAMETER	INCHES MINIMUM 0.3729 AND INCHES MAXIMUM 0.3813
AAUH	SPLINE MINOR DIAMETER	INCHES MINIMUM 0.1105 AND INCHES MAXIMUM 0.1125
AAUJ	SPLINE MAJOR DIAMETER	INCHES MINIMUM 0.1540 AND INCHES MAXIMUM 0.1560
AAUR	GRIP DIAMETER	INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895
AAWB	SHANK UNTHREADED HOLE DIAMETER	THREADS INCHES NOMINAL 0.070
ABQJ	POINT STYLE
ABQZ	INTERNAL DRIVE STYLE
AGAV	END ITEM IDENTIFICATION	F18 E/F
AHYM	NOMINAL THREAD DIAMETER	INCHES 0.190
ANEE	GRIP LENGTH	INCHES MINIMUM 0.865 AND INCHES MAXIMUM 0.885
CMLP	THREAD QUANTITY PER INCH	32
CRSQ	COUNTERSINK ANGLE	DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	THREADS INCHES MINIMUM 1.114 AND INCHES MAXIMUM 1.134
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT, 100 DEGREE TENSION HEAD, GEAR DRIVE RECESS
FEAT	SPECIAL FEATURES	125 KSI SHEAR STRENGTH; FINISH - ALUMINUM PER MIL-C-83488, TYPE II, CLASS III PULS CETYL ALCOHOL PER MIL-L-87132, TYPE 1, GRADE B; INTENDED FOR USE IN ALUMINUM STRUCTURE WHERE APPLIED SEALANT WOULD NOT BE SUITABLE
MATT	MATERIAL	OVERALL NICKEL ALLOY 718
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD SINGLE MATERIAL RESPONSE AA-S 5662
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.