SCREW,CLOSE TOLERANCE

Name: SCREW,CLOSE TOLERANCE
Brand: Atlas Air Supply
SKU: 5305015302414
Availability: LimitedAvailability

Screws

Technical characteristics

24 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
CMLP	THREAD QUANTITY PER INCH	32
AAJF	THREAD DIRECTION	RIGHT-HAND
AAJD	THREAD CLASS	3A
AASA	THREAD LENGTH	INCHES NOMINAL 0.338
AASK	HEAD STYLE
AASL	HEAD DIAMETER	INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.385
AAUJ	SPLINE MAJOR DIAMETER	INCHES NOMINAL 0.155
AAUM	LOCKING FEATURE	LOCKING FEATURE PATCH
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S-QQ--35 OR CADIU- LATE ER A-S-QQ--416, TYE II, CLASS 3.
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	SCREW, CLOSE TOLERANCE.
ANEE	GRIP LENGTH	INCHES NOMINAL 0.500
ABQJ	POINT STYLE
ABQZ	INTERNAL DRIVE STYLE
AHYM	NOMINAL THREAD DIAMETER	INCHES 0.190
AASB	FASTENER LENGTH	INCHES NOMINAL 0.838
FEAT	SPECIAL FEATURES	END SHALL BE FLAT AND CHAMFERED PLUS INCOMPLETE THREAD NOT TO EXCEED TWO PITCHES.
MATT	MATERIAL	OVERALL STEEL CORROSION RESISTING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	OVERALL ASSN STD SINGLE MATERIAL RESPONSE A286 CONFOR-ING TO THE CHE-ISTRY OF A-S5731, A-S5732, A-S5737, OR A-S5853
SFTT	SURFACE TREATMENT	OVERALL CADMIUM OR PASSIVATE
AAUR	GRIP DIAMETER	INCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.189
CQBC	MINIMUM TENSILE STRENGTH	POUNDS PER SQUARE INCH 3180
CRSQ	COUNTERSINK ANGLE	DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0
THSD	THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
AAVA	POINT DIAMETER	INCHES MINIMUM 0.189

15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.