ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Fasteners & Fastening Hardware / NSN 5306-00-288-2476
NSN 5306-00-288-2476  ·  NIIN 002882476  ·  FSC 5306
NO DASHES 5306002882476
In Stock

BOLT,SHEAR

Bolts

Technical characteristics

19 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
AAJDTHREAD CLASS3A
AATCEXTENDED WASHER DIAMETERINCHES MINIMUM 1.040 AND INCHES MAXIMUM 1.050
AAWBSHANK UNTHREADED HOLE DIAMETERFIRST HOLE INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.146
AATBWIDTH BETWEEN FLATSINCHES MINIMUM 0.679 AND INCHES MAXIMUM 0.690
SFTTSURFACE TREATMENTOVERALL PASSIVATE
THSDTHREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)
AASUHEAD HEIGHTINCHES MINIMUM 0.608 AND INCHES MAXIMUM 0.628
AASBFASTENER LENGTHINCHES MINIMUM 2.772 AND INCHES MAXIMUM 2.802
AHYMNOMINAL THREAD DIAMETERINCHES 0.625
ANEEGRIP LENGTHINCHES MINIMUM 1.865 AND INCHES MAXIMUM 1.885
CMLPTHREAD QUANTITY PER INCH18
CQBCMINIMUM TENSILE STRENGTHPOUNDS PER SQUARE INCH 220000
AAJFTHREAD DIRECTIONRIGHT-HAND
AATDEXTENDED WASHER THICKNESSINCHES MINIMUM 0.140 AND INCHES MAXIMUM 0.160
AAURGRIP DIAMETERINCHES MINIMUM 0.6235 AND INCHES MAXIMUM 0.6240
CRZSDISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTERFIRST HOLE INCHES MINIMUM 2.518 AND INCHES MAXIMUM 2.558
AASKHEAD STYLE
AASATHREAD LENGTHINCHES MINIMUM 0.887 AND INCHES MAXIMUM 0.937
MATTMATERIALOVERALL STEEL CORROSION RESISTING

Cross-references

18 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.

Manufacturer part numberCAGE
ST3M571-10D3027624
S11-1059-10D3057928
74328-10D3056878
ST3M571-10D3058998
MB84-10D3073197
ST3M571-10D3076301
VS3060-10D3092215
S371-10D3097928
BM3326-10D3097928
ST3M571-10D30D1579
MB84-10D30L4528
VAL23033-10D3006710
AIC752-10D3006725
VS3060-10D3006950
ST3M571-10D300JV78
ST3M571-10D300ZC92
S371-10D3017446
BM3326-10D3017446