NSN 5307-01-276-9797 · NIIN 012769797 · FSC 5307
NO DASHES 5307012769797
In Stock
STUD,SHOULDERED
Studs
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | STUD THREAD INCHES NOMINAL 0.325 |
| AASA | THREAD LENGTH | NUT THREAD INCHES NOMINAL 0.325 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.377 |
| AAVK | SHOULDER LENGTH | INCHES MINIMUM 0.064 AND INCHES MAXIMUM 0.074 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.330 AND INCHES MAXIMUM 1.360 |
| ADDB | NUT END SHANK LENGTH | INCHES MINIMUM 0.433 AND INCHES MAXIMUM 0.443 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.190 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.190 |
| CRTL | CRITICALITY CODE JUSTIFICATION | SUPP |
| CSJZ | STUD END SHANK LENGTH | INCHES MINIMUM 0.183 AND INCHES MAXIMUM 0.193 |
| CSXH | STUD END SHANK DIAMETER | INCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.190 |
| CSYM | SURFACE FINISH | SHANK MICROINCHES 32.0 |
| CTDT | NUT END SHANK DIAMETER | INCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.190 |
| FEAT | SPECIAL FEATURES | 0.0791 IN. MIN 0.0806 IN. MAX INTHEX. WRENCHING ACCOM NUT END |
| MATT | MATERIAL | TITANIUM ALLOY UNS R56400 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 4928 AND ASSN STD SINGLE MATERIAL RESPONSE A-S 4967 |
| STYL | STYLE DESIGNATOR | |
| SUPP | SUPPLEMENTARY FEATURES | SHANK DIA CLOSE TOL 0.1885 IN. MIN 0.1895 IN. MAX; 5380.0 LB MIN DBL SHEAR; 3180.0 LB MIN TENSION RATING |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 73197-HL146 |
Cross-references
16 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| HL146-6-7-3 | 56878 |
| 3M917-3-7-3 | 56878 |
| 11807-3-7-3 | 59563 |
| 3M917-3-7-3 | 73197 |
| HL146-6-7-3 | 73197 |
| 3M917-3-7-3 | 76301 |
| 3M917-3-7-3 | 92215 |
| HL146-6-7-3 | 92215 |
| HL146-6-7-3 | 97928 |
| 10116468 | A486G |
| 3M917-3-7-3 | L4528 |
| AIC-L-146-3-7-3 | 06725 |
| 3M917-3-7-3 | 06725 |
| 3M917-3-7-3 | 0PTK6 |
| HL146-6-7-3 | 17446 |
| 3M917-3-7-3 | 17446 |