NSN 5315-00-926-5864 · NIIN 009265864 · FSC 5315
NO DASHES 5315009265864
In Stock
PIN,STRAIGHT,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 16.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST MATERIAL RESPONSE AST- A493 OR ASSN STD 2ND MATERIAL RESPONSE AST- A582 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE AST- A380 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.208 |
| FEAT | SPECIAL FEATURES | SMALL CHAMFER END MAY BE 0.016 IN. MIN,0.047 IN. MAX RADIUS IN LIEU OF CHAMFER |
| AAHP | SECOND END STYLE | |
| ACHT | PIN OVERALL LENGTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| MATT | MATERIAL | OVERALL STEEL COMP 410 OR STEEL COMP 416 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 42.0 |
| CQSX | SHEAR STRENGTH | DOUBLE POUND 4000 |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 4.0 AND DEGREES MAXIMUM 16.0 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| ACHU | PIN OVERALL DIAMETER | INCHES MINIMUM 0.1876 AND INCHES MAXIMUM 0.1878 |
| ALWS | SECOND END CORNER RADIUS | INCHES MAXIMUM 0.062 |
| AAGZ | FIRST END STYLE |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS16555-643 | 36126 |
| 2650-3375GP1 ITEM 8 | 51802 |
| MS16555-643 | 80205 |
| 5315PL1361930 | 9009H |
| 2650-3375GP1 ITEM 8 | 95402 |
| MS16555-643 | 96906 |
| 5315009265864 | A00AM |
| MS16555-643 | A9271 |
| 0740663 | S3002 |
| 02013503 | ZD484 |
| D19-1000 | 00141 |
Supersedes
This item replaces cancelled NIIN 010598594. An older drawing citing one of those numbers resolves here.