NSN 5340-00-402-5204 · NIIN 004025204 · FSC 5340
NO DASHES 5340004025204
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHLQ | SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | INCHES MINIMUM 3.870 AND INCHES MAXIMUM 3.880 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES NOMINAL 0.940 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES NOMINAL 0.940 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 3.157 AND INCHES MAXIMUM 3.167 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 0.620 |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 6.430 AND INCHES MAXIMUM 6.440 |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AJZU | FIRST LEG STYLE | |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES MINIMUM 1.745 AND INCHES MAXIMUM 1.755 |
| AHQX | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | INCHES NOMINAL 4.380 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.870 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.870 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.620 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 0.750 |
| AHLT | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | INCHES MINIMUM 0.933 AND INCHES MAXIMUM 0.943 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.750 |
| AHLR | SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 2.000 |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | INCHES MINIMUM 2.214 AND INCHES MAXIMUM 2.224 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 10865001 | 19207 |
| 5340004025204 | A00AM |