NSN 5340-00-827-4417 · NIIN 008274417 · FSC 5340
NO DASHES 5340008274417
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5,ALCLAD T3 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.118 AND INCHES MAXIMUM 0.138 |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635 |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| AHPW | FIRST LEG THICKNESS | INCHES MINIMUM 0.053 AND INCHES MAXIMUM 0.073 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.194 AND INCHES MAXIMUM 0.214 |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| AJFP | FIRST LEG END RADIUS | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| STYL | STYLE DESIGNATOR | |
| AKBU | SECOND LEG STYLE | |
| AJZU | FIRST LEG STYLE | |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| ADLL | SECOND LEG LENGTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AHPX | SECOND LEG THICKNESS | INCHES MINIMUM 0.053 AND INCHES MAXIMUM 0.073 |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AJFQ | SECOND LEG END RADIUS | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AN743B13 | 88044 |
| AN743B13 | 0U583 |
| SAE-AS7431 | 0U583 |