NSN 5340-00-943-6041 · NIIN 009436041 · FSC 5340
NO DASHES 5340009436041
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.035 AND INCHES MAXIMUM 0.050 |
| MATT | MATERIAL | OVERALL PLASTIC POLYHEXAMETHYLENE AMIDE |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.504 AND INCHES MAXIMUM 0.554 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.779 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AST- D4066 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| STYL | STYLE DESIGNATOR | |
| ABMZ | DIAMETER | INCHES MINIMUM 0.198 AND INCHES MAXIMUM 0.213 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.250 |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 835976-00 | 32345 |
| AS25281-F4 | 80205 |
| MS25281-F4 | 81343 |
| QP1754-4 | 81872 |
| 5340PL0846439 | 9009H |
| MS25281F4 | 96906 |
| MS25281&F4 | D9182 |
| 457-5717 | A486G |
| MS25281-4F | D9182 |
| 5340009436041 | SCY13 |
| 300513-833 | 02145 |
| NMC3650-F4 | 03296 |
| MS25281-F4 | 0U583 |
| SAE-AS25281 | 0U583 |
| 652429 | 10001 |
Supersedes
This item replaces cancelled NIINs 015942040 · 005308286. An older drawing citing one of those numbers resolves here.