NSN 5930-00-243-0148 · NIIN 002430148 · FSC 5930
NO DASHES 5930002430148
In Stock
SWITCH,ROTARY
Switches
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AASA | THREAD LENGTH | SINGLE MOUNTING FACILITY INCHES NOMINAL 0.437 |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.321 |
| ABNB | FIRST FLAT LENGTH | SINGLE ACTUATOR INCHES NOMINAL 0.250 |
| ABNC | FLAT HEIGHT | SINGLE ACTUATOR INCHES NOMINAL 0.216 |
| ABWV | SHAFT DIAMETER | SINGLE ACTUATOR INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | SINGLE ACTUATOR INCHES NOMINAL 0.437 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 1.000 AND INCHES MAXIMUM 1.306 |
| AFBH | INDIVIDUAL SECTION QUANTITY | 8 |
| AFDC | NONTURN DEVICE TYPE | AT 3:00 OCLOCK SLOTTED BUSHING |
| AFGA | OPERATING TEMP RANGE | CELSIUS -65.0 TO 125.0 |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPX | POLE QUANTITY | 1 |
| AKPY | THROW QUANTITY | 12 |
| AXGY | MOUNTING METHOD | SINGLE MOUNTING FACILITY THREADED BUSHING WITH PANEL SEAL |
| CQJX | NOMINAL THREAD SIZE | SINGLE MOUNTING FACILITY INCHES 0.375 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 28.0 |
| CQTH | ROTOR THROUGH CONNECTION QUANTITY | 1 |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 12 |
| CRSJ | SHAFT TYPE | SINGLE ACTUATOR ROUND, FLATTED |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| CSHW | CONTACT SWITCHING ACTION | EACH SECTION REAR BREAKS BEFORE MAKES |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | SINGLE ACTUATOR DEGREES 30.0 |
| CSMW | DETENT ROTATIONAL TORQUE RANGE | SINGLE ACTUATOR INCH-POUNDS 1.000 TO 4.500 |
| CTHF | CONTACT LOAD CURRENT RATING | AC AT SEA LEVEL MILLIAMPERES RESISTIVE LOAD 75.0 |
| CTHF | CONTACT LOAD CURRENT RATING | DC AT SEA LEVEL MILLIAMPERES RESISTIVE LOAD 250.0 AND MILLIAMPERES INDUCTIVE LOAD 100.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-3786 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE MOUNTING FACILITY UNEF |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-3786 TO 4 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 44HS30-08-1-12N | 81073 |
| 44MS30-08-1-12N | 81073 |
| MIL-S-3786/4 | 81349 |
| M3786/4-5160 | 81349 |
| MIL-DTL-3786/4 | 81349 |
| 4M30F1-8N12C | 91812 |
| 5930002430148 | A00AM |
| 5930002430148 | SCY13 |
| 499/067/019 | 07421 |
| 12004368-2 | 19204 |
Supersedes
This item replaces cancelled NIIN 013106077. An older drawing citing one of those numbers resolves here.