NSN 5935-00-831-9028 · NIIN 008319028 · FSC 5935
NO DASHES 5935008319028
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFRN | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE |
| CXCG | INCLUDED CONTACT QUANTITY | 2 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.328 |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 1.688 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 1.688 |
| CXCG | INCLUDED CONTACT QUANTITY | 37 |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 600.0 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.556 AND INCHES MAXIMUM 0.587 |
| AFQW | MATING END QUANTITY | 1 |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND SOCKET |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.125 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES NOMINAL 1.156 |
| AFRT | SHELL TYPE | SOLID |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END ALL CONTACT GROUPINGS REMOVABLE |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-26482 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-26482 |
| FEAT | SPECIAL FEATURES | FOUR 0.150 IN. DIA INTERSECTED MTG HOLES SPACED 1.297 IN. BY 1.297 IN. |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 1.156 |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING CRIMP |
| AFRP | INSERT POSITION IN DEG | 0.0 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-DTL-26482 | 81349 |
| MILC0026482 | 81349 |
| MS3127E20-39S | 96906 |
| 5935008319028 | SCY13 |