NSN 5985-01-119-1180 · NIIN 011191180 · FSC 5985
NO DASHES 5985011191180
In Stock
ATTENUATOR,VARIABLE
Antennas, Waveguides, and Related Equipment
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAFS | APPLICATION DESIGN | TRANSMISSION LINE |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 9.750 |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES NOMINAL 8.250 |
| ABKR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES NOMINAL 1.750 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 2.030 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 2.250 |
| ABWF | SCALE LINEARITY | LINEAR |
| ABWG | SCALE DIVISION QUANTITY | 100 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 0.0 TO 65.0 |
| AHTW | VOLTAGE STANDING WAVE RATIO | 1.40 |
| AHUC | COAXIAL CONNECTOR SERIES DESIGNATION | BNC |
| AJDB | POWER RATING | WATTS PEAK 1.0 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ASYC | INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 0.6 |
| ASYD | OVERALL ATTENUATION RANGE IN DECIBELS | 0.0 TO 101.0 |
| ASYF | ATTENUATION VARIATION METHOD | STEPPED |
| ASYG | STEP POSITION QUANTITY | 101 |
| ASYH | ATTENUATION PER STEP IN DECIBELS | 1.0 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BNGR | FREQUENCY RANGE | HERTZ MINIMUM 0.000 AND GIGAHERTZ MAXIMUM 1.000 |
| BQNR | OVERALL ATTENUATION ACCURACY IN DECIBELS | -2.00 TO 2.00 |
| CGGK | MOUNTING THREAD QUANTITY | PER INCH 32 |
| CQTQ | ADJUSTMENT DEVICE TYPE AND QUANTITY | LEVER 9 |
| CQYJ | MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.164 |
| CTGG | IMPEDANCE RATING IN OHMS | INPUT-OUTPUT 50.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-A-24215 |
| TTQY | TERMINAL TYPE AND QUANTITY | CONNECTOR, COAXIAL, FEMALE 2 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 50TX101-2303 | 52750 |
| MIL-DTL-24215/10 | 81349 |
| MIL-A-24215/10 | 81349 |
| M24215/10-001 | 81349 |
| 5985011191180 | A00AM |