NSN 6680-00-112-0227 · NIIN 001120227 · FSC 6680
NO DASHES 6680001120227
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | BOTH ENDS RIGHT-HAND |
| AJYP | SCREW THREAD SERIES DESIGNATOR | SECOND END UNF |
| AKMH | CORE DIAMETER | INCHES NOMINAL 0.150 |
| APJC | THREAD LOCATION | BOTH ENDS INTERNAL |
| APTD | END TYPE | FIRST END ROUND KEYED |
| APTD | END TYPE | SECOND END SQUARE MALE |
| ASDB | WIDTH ACROSS FLATS | FIRST END INCHES NOMINAL 1.000 |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| CGDN | MINIMUM OPERATING RADIUS | INCHES 5.000 |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION.TORSIONAL STRENGTH IN BOTH DIRECTIONS 15.0 LBS. THREAD SIZE IS 5/8-18 AND 7/8-18.CADMIUM OR ZINC PLATED. |
| MATT | MATERIAL | CASING RUBBER AND STEEL |
| MATT | MATERIAL | CORE STEEL |
| SCSZ | CROSS SECTION SIZE | ACROSS FLATS SECOND END INCHES MINIMUM 0.101 AND INCHES MAXIMUM 0.104 |
| SCSZ | CROSS SECTION SIZE | DIAMETER FIRST END INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.153 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | CLASS 1 AND GROUP A AND TYPE I |
| ASDB | WIDTH ACROSS FLATS | SECOND END INCHES NOMINAL 0.750 |
| AWZY | END CONNECTION TYPE | BOTH ENDS THREADED INTERNAL |
| BPPL | WRENCHING FACILITY TYPE | BOTH ENDS HEXAGON |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES NOMINAL 90.000 |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.500 |
| CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER OR RUBBER COVER |
| CFRW | END OVERALL DIAMETER | FIRST END INCHES NOMINAL 1.188 |
| CFRW | END OVERALL DIAMETER | SECOND END INCHES NOMINAL 0.875 |
| CFRZ | CORE OVERALL LENGTH | INCHES NOMINAL 96.125 |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| AJYP | SCREW THREAD SERIES DESIGNATOR | FIRST END UNS |
| AEDN | TIP LENGTH | SECOND END INCHES MINIMUM 0.950 AND INCHES MAXIMUM 1.010 |
| AEDN | TIP LENGTH | FIRST END INCHES MINIMUM 1.018 AND INCHES MAXIMUM 1.022 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 96.125 |
| AECT | THREAD DEPTH | FIRST END INCHES NOMINAL 0.327 |
| AECT | THREAD DEPTH | SECOND END INCHES NOMINAL 0.375 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7344191 | 19207 |
| 1584678 | 24617 |
| 1584678 | 70040 |
| MIL-DTL-10215K | 81349 |
| M10215-1B111 | 81349 |
| M10215-1F111 | 81349 |
| MIL-PRF-10215 | 81349 |
| MILS10215 | 81349 |
| MIL-DTL-10215 | 81349 |
| MS51071-11 | 96906 |
| 6680001120227 | A00AM |
Supersedes
This item replaces cancelled NIINs 005713509 · 005801038 · 007412913. An older drawing citing one of those numbers resolves here.