NSN 6680-00-798-3059 · NIIN 007983059 · FSC 6680
NO DASHES 6680007983059
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SCSZ | CROSS SECTION SIZE | ACROSS FLATS SECOND END INCHES MINIMUM 0.101 AND INCHES MAXIMUM 0.104 |
| SCSZ | CROSS SECTION SIZE | DIAMETER FIRST END INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.153 |
| SFTT | SURFACE TREATMENT | CORE ZINC |
| ZZZV | FSC APPLICATION DATA | SPEEDOMETER,COMBAT TANK |
| APTD | END TYPE | SECOND END SQUARE MALE |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION |
| MATT | MATERIAL | CASING RUBBER AND STEEL |
| MATT | MATERIAL | CORE STEEL |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | BOTH ENDS RIGHT-HAND |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 96.078 AND INCHES MAXIMUM 96.391 |
| AECT | THREAD DEPTH | FIRST END INCHES NOMINAL 0.327 |
| AECT | THREAD DEPTH | SECOND END INCHES NOMINAL 0.375 |
| AEDN | TIP LENGTH | FIRST END INCHES MINIMUM 1.018 AND INCHES MAXIMUM 1.022 |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| CGDN | MINIMUM OPERATING RADIUS | INCHES 5.000 |
| CFRW | END OVERALL DIAMETER | SECOND END INCHES NOMINAL 0.875 |
| CFRZ | CORE OVERALL LENGTH | INCHES MINIMUM 96.047 AND INCHES MAXIMUM 96.359 |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES MINIMUM 94.937 AND INCHES MAXIMUM 95.062 |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.500 |
| CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER OR RUBBER COVER |
| CFRW | END OVERALL DIAMETER | FIRST END INCHES NOMINAL 1.188 |
| ANQR | PROTECTIVE COATING METHOD | CORE COATED |
| ASDB | WIDTH ACROSS FLATS | FIRST END INCHES NOMINAL 1.000 |
| ASDB | WIDTH ACROSS FLATS | SECOND END INCHES NOMINAL 0.750 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | SECOND END UNF |
| APJC | THREAD LOCATION | BOTH ENDS INTERNAL |
| AWZY | END CONNECTION TYPE | BOTH ENDS THREADED INTERNAL |
| BPPL | WRENCHING FACILITY TYPE | BOTH ENDS HEXAGON |
| AEDN | TIP LENGTH | SECOND END INCHES MINIMUM 0.950 AND INCHES MAXIMUM 1.010 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | FIRST END UNS |
| APTD | END TYPE | FIRST END ROUND KEYED |
| AKMH | CORE DIAMETER | INCHES NOMINAL 0.150 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-DTL-10215K | 81349 |
| MIL-DTL-10215 | 81349 |
| M10215-1F112 | 81349 |
| 6680007983059 | SCY13 |
Supersedes
This item replaces cancelled NIINs 009513061 · 010308922. An older drawing citing one of those numbers resolves here.