NSN 6680-00-850-9334 · NIIN 008509334 · FSC 6680
NO DASHES 6680008509334
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKMH | CORE DIAMETER | INCHES NOMINAL 0.150 |
| APJC | THREAD LOCATION | FIRST END INTERNAL |
| APJC | THREAD LOCATION | SECOND END INTERNAL |
| BPPL | WRENCHING FACILITY TYPE | SECOND END HEXAGON |
| ANQR | PROTECTIVE COATING METHOD | CORE COATED |
| AWZY | END CONNECTION TYPE | FIRST END THREADED INTERNAL |
| ZZZV | FSC APPLICATION DATA | TACHOMETER AND SPEEDOMETER VEHICULAR A |
| ASDB | WIDTH ACROSS FLATS | SECOND END INCHES NOMINAL 0.750 |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| CFRW | END OVERALL DIAMETER | SECOND END INCHES NOMINAL 0.875 |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| AECT | THREAD DEPTH | FIRST END INCHES NOMINAL 0.327 |
| AECT | THREAD DEPTH | SECOND END INCHES NOMINAL 0.375 |
| AEDN | TIP LENGTH | FIRST END INCHES MINIMUM 1.018 AND INCHES MAXIMUM 1.022 |
| AEDN | TIP LENGTH | SECOND END INCHES MINIMUM 0.950 AND INCHES MAXIMUM 1.010 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | FIRST END UNS |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.500 |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 41.0781 AND INCHES MAXIMUM 41.3906 |
| AWZY | END CONNECTION TYPE | SECOND END THREADED INTERNAL |
| BPPL | WRENCHING FACILITY TYPE | FIRST END HEXAGON |
| MATT | MATERIAL | CORE STEEL |
| SCSZ | CROSS SECTION SIZE | ACROSS FLATS SECOND END INCHES MINIMUM 0.101 AND INCHES MAXIMUM 0.104 |
| SCSZ | CROSS SECTION SIZE | DIAMETER FIRST END INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.153 |
| ASDB | WIDTH ACROSS FLATS | FIRST END INCHES NOMINAL 1.000 |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION,TORSION STRENGTH WINDING DIRECTION 15.0 POUNDS.THREAD SIZE IS 5/8-18 AND 7/8-18. |
| SFTT | SURFACE TREATMENT | CORE ZINC |
| CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER OR RUBBER COVER |
| APTD | END TYPE | FIRST END ROUND KEYED |
| APTD | END TYPE | SECOND END SQUARE MALE |
| MATT | MATERIAL | CASING RUBBER AND STEEL |
| CFRW | END OVERALL DIAMETER | FIRST END INCHES NOMINAL 1.187 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-S-10215 | 81349 |
| MIL-PRF-10215 | 81349 |
| M10215-1F103 | 81349 |
| MIL-DTL-10215 | 81349 |
| M10215-1B103 | 81349 |
| MIL-DTL-10215K | 81349 |
| MS51071-3 | 96906 |
| 6680008509334 | A00AM |
| 7983060 | 19207 |
Supersedes
This item replaces cancelled NIIN 005079975. An older drawing citing one of those numbers resolves here.