PLASTIC MATERIAL,CELLULAR

Name: PLASTIC MATERIAL,CELLULAR
Brand: Atlas Air Supply
SKU: 9330015023042
Availability: LimitedAvailability

Plastics Fabricated Materials

Application: AIRCRAFT, THUNDERBOLT II, A-10

Technical characteristics

12 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

Technical characteristics from the federal item record
MRC	Requirement	Value
AAAU	FIRE RETARDING CHARACTERISTIC	NOT FIRE RETARDING
ABGL	WIDTH	INCHES NOMINAL 16.760
ABNM	THICKNESS	INCHES NOMINAL 6.790
ABRY	LENGTH	INCHES NOMINAL 24.620
AGAV	END ITEM IDENTIFICATION	AIRCRAFT, THUNDERBOLT II, A-10
BDNZ	DENSITY RATING	POUNDS PER CUBIC FOOT 1.2
CTLY	COMPRESSION STRENGTH AT 25 PCT DEFLECTION	POUNDS PER SQUARE INCH (PSI) MINIMUM 0.35
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	FILLER FOAM
FEAT	SPECIAL FEATURES	IRREGULARLY SHAPED - SEE DRAWING FOR DETAILS; FAR SIDE HAS 30 DEGREE CUTOUT ALONG LEFT/LONG EDGE (FAR SIDE UP) & ROUGHLY TRIANGULAR CUTOUT ALONG RIGHT EDGE, 30 TO 15 DEGREES TOP TO BOTTOM (FAR SIDE UP) AND IS MARKED ALONG LEFT EDGE: "FWD" NEAR BOOT CORNER, "UP" IN CENTER & PART NUMBER NEAR TOP; NEAR SIDE SLANTS CROSSWISE FROM BOTTOM 30 DEGREE CUT TO 0.50 FROM TOP, 9.71 FROM LEFT EDGE, ON TO MEET TOP, 4.85 FROM LEFT & BACK TO 0.50 FROM TOP AT LEFT EDGE; UPPER SURFACE HAS GRADUATED LENGTHWISE ANGLES; BOTTOM EDGE HAS CROSSWISE CUT OF 30 DEGREES, BOTTOM SURFACE TO TOP SURFACE; THERE IS A V-SHAPED CUTOUT, WITH 1 SIDE STARTING 9.37 INCHES FROM BOTTOM EDGE & 2.00 INCHES DEEP, AT 30 DEGREE ANGLE TOWARD TOP SURFACE & TOWARD BOTTOM EDGE & OPPOSITE CUT FROM 11.75 FROM BOTTOM EDGE, 2.00 DEEP, 30 DEGREES TOWARD TOP SURFACE & TOWARD TOP EDGE
MATT	MATERIAL	PLASTIC POLYURETHANE
SFCD	SURFACE CONDITION	ROUGH
SUPP	SUPPLEMENTARY FEATURES	MATERIAL TO BE RETICULATED FOAM PER SM-ALC SPECIFICATION MS-MMRS-87-100

3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.